Xerox 3210 Guida Utente

Pagina di 140
Loading originals and print media_ 37
5. Place the tray into the machine.
6. Set the paper size from your computer.
LOADING PAPER
Loading paper in the tray 1 or optional tray
Load the print media you use for the majority of your print jobs in the tray 1. 
The tray 1 can hold a maximum of 250 sheets of 80 g/m
2
 (20 lb bond) plain 
paper. 
You can purchase an optional tray and attach it below the standard tray to 
load an additional 250 sheets of paper. (See "Ordering supplies and 
accessories" on page 83.)
1. To load paper, pull and open the paper tray and place paper with the 
side you want to print facing down.
2. After loading paper, set the paper type and size for the tray 1. See 
Software section for PC-printing.
PRINTING ON SPECIAL PRINT MATERIALS
The machine can hold special sizes and types of print material, such as 
postcards, note cards, and envelopes. Especially, it is useful for single page 
printing on letterhead or colored paper.
Feeding the print material manually
Load only one size of print media at a time in the tray.
To prevent paper jams, do not add paper when there is still paper in 
the tray. This also applies to other types of print media.
Print media should be loaded face up with the side you want to print, 
and the top edge going into the tray first. Place print materials in the 
center of the tray.
Always load only the specified print media to avoid paper jams and 
print quality problems. (See "Selecting print media" on page 33.)
Flatten any curl on postcards, envelopes, and labels before loading 
them into the tray.
1.
Open the manual
 tray. 
2. Load the paper with the side to be printed on facing up.
Do not push the paper width guides far enough to cause the 
materials to warp.
If you do not adjust the paper width guides, it may cause paper 
jams.
Using photographic paper or coated paper may cause problems, 
requiring repairs. Such repairs are not covered by Xerox’s warranty or 
service agreements.
1
Full
2
Empty
If you experience problems with paper feed, place one sheet at a 
time in the manual tray.
You can load previously printed paper. The printed side should be 
facing up with an uncurled edge at the front. If you experience 
problems with paper feed, turn the paper around. Note that print 
quality is not guaranteed. 
downloadlike
ArtboardArtboardArtboard