Xerox 7132 Guida Utente
Machine Components
Xerox WorkCentre 7132 System Administration Guide
15
Integrated Office Finisher
Allows you to staple or sort copies automatically. The Integrated OfficeFinisher Center
Tray can hold 500 sheets of 20 lb bond or 80 g/m2 paper in Letter/A4 size or smaller.
Allows you to staple or sort copies automatically. The Integrated OfficeFinisher Center
Tray can hold 500 sheets of 20 lb bond or 80 g/m2 paper in Letter/A4 size or smaller.
Duplex Module
Allows you to make double-sided copies. The Duplex Module can be used when paper
is supplied from Tray 1, 2, or 3. For more information, refer to 2 Sided Copying in the
Copy chapter of the User Guide.
Allows you to make double-sided copies. The Duplex Module can be used when paper
is supplied from Tray 1, 2, or 3. For more information, refer to 2 Sided Copying in the
Copy chapter of the User Guide.
Trays 2 & 3
At the base of the machine, the following optional trays will be available, depending on
the configuration.
At the base of the machine, the following optional trays will be available, depending on
the configuration.
• Two Tray Module – Can be added to the standard 1-tray configuration. Each tray
can hold 520 sheets of 20 lb bond or 80 g/m
2
paper.
• Tandem Tray Module – Can be added to the standard 1-tray configuration to provide
high volume paper sources. Tray 2 can hold a maximum of 900 sheets of 20 lb bond
or 80 g/m
or 80 g/m
2
paper in Letter or A4 size, long edge feed. Tray 3 can hold 1,200 sheets
of 20 lb bond or 80 g/m
2
paper in Letter or A4 size. The Tandem Tray Module is
referred to as “TTM” in this manual.
Tray 5 (Bypass)
Allows you to bypass the standard paper trays to print on different sized paper. The
Bypass Tray can hold 100 sheets of 20 lb bond or 80 g/m
Allows you to bypass the standard paper trays to print on different sized paper. The
Bypass Tray can hold 100 sheets of 20 lb bond or 80 g/m
2
paper in sizes ranging from
B6 (SEF) or Envelope Monarch (LEF) to A3 (SEF) or 11 × 17 inch (SEF).
NOTE: Do not place paper with a length less than 140mm in the Bypass Tray, as this
may cause paper jams and potentially damage the inside of the machine.
NOTE: Do not place paper with a length less than 140mm in the Bypass Tray, as this
may cause paper jams and potentially damage the inside of the machine.
Staple Cartridge
Integrated Office
Finisher (Optional)
Finisher (Optional)
Integrated Office
Finisher Center Tray
Finisher Center Tray