Xerox wc7530 Guida Utente
Scanning
114
WorkCentre 7500 Series Multifunction Printer
User
Guide
1. Press the Services Home button, then touch Workflow Scanning.
2. Touch the Job Assembly tab, then touch Build Job > On.
3. Select or clear the Display this window between segments check box.
4. Program and scan the first segment:
2. Touch the Job Assembly tab, then touch Build Job > On.
3. Select or clear the Display this window between segments check box.
4. Program and scan the first segment:
a. Load the originals for the first segment.
b. Press the green Start button on the control panel.
b. Press the green Start button on the control panel.
Note:
If a password is required, contact the system administrator.
5. Program and scan additional segments:
a. Load the originals for the next segment.
b. When the Build Job screen appears, touch Program Next Segment.
c. Press the green Start button to scan the originals for that segment.
b. When the Build Job screen appears, touch Program Next Segment.
c. Press the green Start button to scan the originals for that segment.
6. Repeat the previous step for each remaining segment.
Note:
At any time, you can touch Delete Last Segment or Delete All Segments to modify the job.
7. When all of the segments have been programmed and scanned, touch Submit the Job. The Job
Progress screen appears, and the individual segments are scanned as a single job.
8. On the Job Progress screen, touch Job Details to view a summary of the job.
Note:
If necessary, touch Delete > Delete Job to cancel the job.