Gestetner dsm651 Guida Di Rete
Remote Maintenance by telnet
91
4
info
Use the "info" command to display
printer information such as paper
tray, output tray, and printer lan-
guage.
printer information such as paper
tray, output tray, and printer lan-
guage.
❖
❖
❖
❖ Printer information display
msh> info
Reference
For details about displayed con-
tents, see p.107 “Getting Printer In-
formation over the Network”.
tents, see p.107 “Getting Printer In-
formation over the Network”.
ipp
Use the “ipp” command to configure
IPP settings.
IPP settings.
❖
❖
❖
❖ Viewing settings
The following command displays
the current IPP settings:
the current IPP settings:
msh> ipp
Example output:
Example output:
timeout=900(sec)
auth basic
auth basic
• The “timeout” setting specifies
how many seconds the compu-
ter tries to send print jobs when
no connection can be made to
the network printer.
ter tries to send print jobs when
no connection can be made to
the network printer.
• The “auth” setting indicates the
user authorization mode.
❖
❖
❖
❖ IPP timeout configuration
Specify how many seconds the
computer waits before canceling
an interrupted print job. The time
can be entered between 30 to 65535
seconds.
computer waits before canceling
an interrupted print job. The time
can be entered between 30 to 65535
seconds.
msh> ipp timeout [30 -
65535]
65535]
❖
❖
❖
❖ IPP user authorization configuration
Use IPP user authorization to re-
strict users to print with IPP. The
default is “off”.
strict users to print with IPP. The
default is “off”.
msh> ipp auth {basic|di-
gest|off}
gest|off}
• User authorization settings are
“basic” and “digest”.
• Use “off” to remove a user's au-
thorization.
• If user authorization is speci-
fied, register a user name. You
can register up to 10 users.
can register up to 10 users.
❖
❖
❖
❖ IPP user configuration
Use the following command:
msh> ipp user
The following message appears:
The following message appears:
msh> Input user number (1
to 10):
Enter the number, user name, and
password.
to 10):
Enter the number, user name, and
password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the
following message appears:
msh> IPP password:*******
After configuring the settings, the
following message appears:
User configuration changed.