Gestetner dsm755 Guida Al Funzionamento
Copier/Document Server Features
106
3
Edit
This section describes various items of [Edit] under [Copier / Document Server Fea-
tures]
tures]
.
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0-30 mm (in increments of 1 mm)
• Inch version: 0"-1.2" (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2-99 mm (in increments of 1 mm)
• Inch version: 0.1"-3.9" (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06") will not be displayed as the width of
the separation line, when specifying solid or broken lines.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0-30 mm (in increments of 1 mm)
• Inch version: 0"-1.2" (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2-99 mm (in increments of 1 mm)
• Inch version: 0.1"-3.9" (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06") will not be displayed as the width of
the separation line, when specifying solid or broken lines.
❖ Front Margin: Left / Right
You can specify left and right margins on the front side of copies in Margin
Adjustment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"
Adjustment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"
❖ Back Margin: Left / Right
You can specify left and right margins on the back side of copies in Margin
Adjustment mode.
• Left
• Right
Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
Adjustment mode.
• Left
• Right
Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ Front Margin: Top / Bottom
You can specify top and bottom margins on the front side of copies in Margin
Adjustment mode.
• Top
• Bttm.
Default:
• Metric version: Top / Bottom 0 mm
• Inch version: Top / Bottom 0.0"
Adjustment mode.
• Top
• Bttm.
Default:
• Metric version: Top / Bottom 0 mm
• Inch version: Top / Bottom 0.0"