Gestetner f540 Istruzione Sull'Installazione

Preparing the
Toner Cartridge

ZHMX040E

Continued on next page

Pull the fixing material to the right to
remove.

WARNING:

• Disconnect the power (by pulling the plug, not the

cable) if the power cable or plug becomes frayed or
otherwise damaged.

• To avoid electric shock or laser radiation exposure,

do not remove any covers or screws other than those
specified in this manual.

• Turn off the power and disconnect the power (by pull-

ing the plug, not the cable) if any of the following oc-
curs:

• You spill something into the machine.

• You suspect that your machine needs service or re-

pair.

• The external housing of your machine has been dam-

aged.

• Disposal can be done by our authorized dealer.

CAUTION:

• Protect the machine from damp and wet weather, such

as rain and snow.

• Do not allow paper clips, staples, or other small metal-

lic objects to fall inside the machine.

• For environmental reasons, do not dispose of the ma-

chine or supply waste at household waste collection
points. Disposal can take place at an authorized dealer.

• The inside of the machine could be very hot. Do not

touch the parts labelled “hot surface”. Otherwise in-
jury might occur.

• Our products are engineered to high standards of qual-

ity and functionality, and we recommend that you use
only the supplies available at an authorized dealer.

Remove the plastic wrapping from the
machine, and then remove all shipping
tape.

Turn the foam block 90

° counterclock-wise.

WARNING:

• Do not burn spilled or used toner. Toner dust might

ignite when exposed to an open flame.

• Dispose of used toner cartridges in accordance with

local regulations.

CAUTION:

• Keep toner (used or unused) and toner cartridges out

of the reach of children.

Open the Auto Document Feeder (ADF) and
take out the protective sheet.

ZHMX020E

ZHMX030E

Note

• The protective sheet on the ADF (Auto Document

Feeder) refers to this section as “Preparing the Toner
Cassette”.