ONKYO ht-s7100 Guida Utente

 

83

 

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you 
can select a different source for each room.

There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.

 

This setup allows 5.1-channel playback in your main 
room and 2-channel stereo playback in Zone 2, with a 
different source in each room. This is called Powered 
Zone 2, as the Zone 2 speakers are powered by the AV 
receiver. Note that when Powered Zone 2 is turned off, 
you can enjoy 7.1-channel playback in your main room.

 

• Connect your Zone 2 speakers to the AV receiver’s 

ZONE 2 SPEAKERS L/R speaker terminals.

 

• With this setup, the Zone 2 volume is controlled by the 

AV receiver.

• Powered Zone 2 cannot be used if Speaker Type is set 

 

This setup allows 7.1-channel playback in your main lis-
tening room and 2-channel stereo playback in Zone 2, 
with a different source in each room.

 

• Use an RCA audio cable to connect the AV receiver’s 

ZONE 2 LINE OUT L/R jacks to an analog audio 
input on your Zone 2 amp.

• Connect your Zone 2 speakers to the speaker termi-

nals on your Zone 2 amp.

 

• The Zone 2 volume must be set on the Zone 2 amp.

To use this setup, you must set the Powered Zone 2 
setting to Act (see page 84).

TV

AV receiver

TV

Receiver/

integrated amp

AV receiver

HT-S7100_En.book Page 83 Friday, July 11, 2008 10:36 AM