ONKYO ht-s9300thx Manuale Utente
54
En
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
53), you must set the
“Front High/Zone2” setting to “Zone2”.
Menu
Speaker Setup
Note
• When “Zone2” is selected and Zone 2 turned on, the Zone 2
speakers connected to the FRONT HIGH OR ZONE 2
SPEAKERS L/R terminals output sound, but the surround back
or front high speakers connected to the SURR BACK OR
FRONT HIGH SPEAKERS L/R terminals do not. When
“Zone2” is selected and Zone 2 turned off, the surround back or
front high speakers output sound as normal.
SPEAKERS L/R terminals output sound, but the surround back
or front high speakers connected to the SURR BACK OR
FRONT HIGH SPEAKERS L/R terminals do not. When
“Zone2” is selected and Zone 2 turned off, the surround back or
front high speakers output sound as normal.
• When the “Front High/Zone2” setting is set to “Zone2” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
standby mode slightly increases.
This section explains how to turn Zone 2 on and off, how
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
Controlling Zone 2 from the AV receiver
Note
• While Powered Zone 2 is being used, listening modes that
require surround back speakers and front high speakers (6.1/7.1),
such as Dolby Digital EX, DTS-ES, THX I/S Cinema, and
Dolby Pro Logic IIz Height are unavailable.
such as Dolby Digital EX, DTS-ES, THX I/S Cinema, and
Dolby Pro Logic IIz Height are unavailable.
• When the “Front High/Zone2” setting is set to “Zone2” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
standby mode slightly increases.
Setting the Powered Zone 2
1
In the “Speaker Setup” menu, select “Speaker
Settings”, and then press
Settings”, and then press
ENTER.
2
Use
q/w to select “Front High/Zone2” and e/r to
select “Zone2”.
`
Zone2:
Zone 2 speakers can be used (Powered Zone 2
enabled).
enabled).
Using Zone 2
1
To turn on Zone 2 and select an input source, press
ZONE 2 followed by an input selector button
within 8 seconds.
ZONE 2 followed by an input selector button
within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights.
To select AM or FM, press the TUNER input selec-
tor button repeatedly.
tor button repeatedly.
To select the same source as that of the main room,
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
tion will be heard in each room.
2
To turn off Zone 2, press
OFF.
OFF
ZONE 2
– /+
ZONE 2 indicator
Input selector buttons