ONKYO TX-SR501 Manuale Utente
25
If you’ve connected a MiniDisc recorder to the TAPE
inputs, you can set the TX-SR501/TX-SR501E so that
“MD” appears on the display instead of “TAPE.” Simply
press and hold the [TAPE] button until “MD” appears (about
two seconds).
inputs, you can set the TX-SR501/TX-SR501E so that
“MD” appears on the display instead of “TAPE.” Simply
press and hold the [TAPE] button until “MD” appears (about
two seconds).
Notes:
• For AV components that are connected to only analog
• For AV components that are connected to only analog
inputs, choose the “– – – –” setting.
• If you don’t press the [DIGITAL INPUT] button for three
seconds, the previous display reappears.
• You can also specify a signal format for the DIGITAL
With this function you can specify the number of speakers
that you are using.
that you are using.
Notes:
• Since some listening modes require a minimum number of
• Since some listening modes require a minimum number of
speakers, when you change the above setting, the listening
mode may change as well (see page 34).
mode may change as well (see page 34).
• This setting cannot be set if a pair of headphones are con-
nected, speaker set B is on, or Multich is selected.
• The TX-SR501/TX-SR501E remembers this setting, so
you only need to set it once.
With this function you can choose the surround channels
from which the subwoofer’s output is derived.
from which the subwoofer’s output is derived.
Notes:
• If you use Mode 2 or Mode 3 with the Stereo listening
• If you use Mode 2 or Mode 3 with the Stereo listening
mode, your subwoofer may produce no sound when you
play material in certain surround formats, including
2-channel Dolby Digital, DTS, etc.
play material in certain surround formats, including
2-channel Dolby Digital, DTS, etc.
• The subwoofer mode cannot be set if a pair of headphones
are connected, speaker set B is on, or Multich is selected.
• The TX-SR501/TX-SR501E remembers the subwoofer
mode setting, so you only need to set it once.
Specifying the Number of Speakers
1
Press the [SPEAKER ADJUST]
button.
button.
The current speaker configuration is dis-
played.
played.
2
Use the PRESET/ADJUST [
] [
]
buttons to specify the number of
speakers.
speakers.
The available settings are shown below.
SPEAKER ADJUST
PRESET/ADJUST
Front left
Center
Front right
Surround left
Surround back
Surround right
6 speakers
5 speakers
4 speakers
3 speakers
2 speakers
Setting the Subwoofer Mode
1
Press the [SUBWOOFER MODE]
button once.
button once.
The current subwoofer mode is displayed.
2
Press the [SUBWOOFER MODE]
button repeatedly to select the fol-
lowing modes:
button repeatedly to select the fol-
lowing modes:
If you don’t press the [SUBWOOFER
MODE] button for three seconds, the pre-
vious display reappears.
MODE] button for three seconds, the pre-
vious display reappears.
See page 28 for information on playing your AV compo-
nents through the TX-SR501/TX-SR501E.
nents through the TX-SR501/TX-SR501E.
To get the most out of your TX-SR501/TX-SR501E, you
should also set the functions on pages 26 and 27.
should also set the functions on pages 26 and 27.
SUBWOOFER
MODE
SUBWOOFER
MODE
Parameter
Description
Subwoofer
Mode 1
Mode 1
The subwoofer outputs
the low frequencies of all
channels.
the low frequencies of all
channels.
Subwoofer
Mode 2
Mode 2
The subwoofer outputs
the low frequencies of the
center and surround
channels only.
the low frequencies of the
center and surround
channels only.
Subwoofer
Mode 3
Mode 3
The subwoofer outputs
the LFE (Low Frequency
Effects) channel of 6.1
source material.
the LFE (Low Frequency
Effects) channel of 6.1
source material.
Subwoofer
Off
Off
The subwoofer output is
off. Choose this setting if
you’re not using a sub-
woofer, or want to turn off
your subwoofer.
off. Choose this setting if
you’re not using a sub-
woofer, or want to turn off
your subwoofer.