Manualsbrain.com
  1. Manuali
  2. Marche
  3. ONKYO
  4. TX-SA705
  5. Guida Utente

ONKYO TX-SA705 Guida Utente

Scarica
Pagina di 116
100
Zone 2
—Continued
To use Zone 2, you must make this setting. It enables the 
speakers connected to the ZONE 2 SPEAKERS termi-
nals so that they produce sound when Zone 2 is used.
Note:
This procedure can also be performed on the AV 
receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button.
Setting the Powered Zone 2
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
] 
buttons to select “7. Hardware 
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
3
Use the Up and Down [
]/[
] 
buttons to select “2. Zone2,” and 
then press [ENTER].
The Zone2 menu appears.
4
Use the Left and Right [
]/[
] 
buttons to select:
Not Act: ZONE 2 SPEAKERS termi-
nals deactivated.
Act: ZONE 2 SPEAKERS termi-
nals activated.
When Zone 2 is activated and turned on 
(see below), the speakers connected to 
the ZONE 2 SPEAKERS terminals 
output sound, but the speakers con-
nected to the SURR BACK SPEAK-
ERS terminals do not (when Zone 2 is 
activated but not used, the surround 
back speakers work as normal).
ENTER
ENTER
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
ENTER
ENTER
7–2. Zone2
Powered Zone2 
Not Act
5
Press the [SETUP] button.
The setup menu closes.
TX-SR705_En.book  Page 100  Monday, May 28, 2007  2:13 PM