Elmo dvr v5.01 Manuale Utente
3.6.5. Setup For All Cameras - Recording/Display Options
To set up recording/display options for all cameras, do the following:
1. Choose the Screen Size for all cameras from 360x240 and 720x480 pixel. Screen Size refers to the
resolution of the received video image. The larger the screen size, the larger the picture and the better the quality.
Large screen size, however, will result in larger file size and shorter recording period.
Large screen size, however, will result in larger file size and shorter recording period.
2. Choose Quality (30%-100%). This value refers to the recording quality of the video. The higher the percentage,
the better the recording quality.
3. Choose Transfer Quality (30%-100%). This value refers to the transfer quality of the video recording that is
viewed remotely through ELMO DVR Remote. The lower the quality, the worse the image appearance. The transmission
speed, however, improves as the quality decreases.
speed, however, improves as the quality decreases.
4. Choose Color of Motion Area between Green and Red depending on personal esthetical preferences. When
the motion is detected on a specific camera, the triggered motion detection zone will be highlighted on the main
screen in the chosen color.
screen in the chosen color.
5. Set the cameras to be displayed in the Full Screen mode on the main screen, when motion is detected. One or more
cameras can be configured. Separate camera numbers with commas. In this example cameras 1 and 3 will be displayed
in the Full Screen mode if the motion is detected on them.
in the Full Screen mode if the motion is detected on them.
6. Set the Dwell Time(Sec) (1 to 60 seconds) for the camera to stay in the full screen mode after the motion
detection. In the example above, the camera will remain in the Full Screen mode for 5 seconds after the motion de-
tection.
tection.
7. Click No Full Screen to reset the Full Screen When Motion option
8. Set Camera Dwell Time (3 to 30 seconds). This is the Dwell time for the camera rotation on the main
screen. When the main screen is set to 4 cameras division and Rotate is clicked, available cameras will rotate ac-
cording to the dwell time specified. In this example, the quad screen will display next 4 cameras every 5 seconds.
cording to the dwell time specified. In this example, the quad screen will display next 4 cameras every 5 seconds.
Note
This option only becomes available when 8
or more cameras are supported by the sys-
tem.
or more cameras are supported by the sys-
tem.
22
ELMO DVR User Manual v5.01
Motion Setup
ELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at