Samsung WB700 Guida Utente

Playback/Editing

  88

Viewing files on a TV or HDTV

Turn on your camera.

• 

If you have an Anynet+ compatible Samsung HDTV, and you 
have turned the Anynet+ function on in your camera, the 
HDTV turns on automatically and displays the camera screen, 
and the camera automatically enters Playback mode.

• 

If you turn Anynet+ off in your camera, the HDTV does not turn 
on automatically.

• 

If you don't have Anynet+ on your TV or Anynet+ is turned off 
in your camera, turn on your TV, and then select the HDMI 
source on your TV using your TV's remote control.

View files using the buttons on your camera or a remote 
control of your HDTV.

• 

If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in 
the camera’s settings menu (p. 101) to control the camera and TV with 
the TV’s remote control.

• 

Anynet+ lets you control all connected Samsung A/V devices with the 
TV remote control.

• 

The time it takes for the camera to connect to your HDTV may vary 
with the type of SD or SDHC card you use. A faster SD or SDHC card 
will not necessarily result in a faster HDMI transfer, because the main 
function of the card is to improve transfer rate during shooting.

You can view high-quality and uncompressed photos or videos 
on an HDTV using the optional HDMI cable. HDMI (High Definition 
Multimedia Interface) is supported by most HDTVs. For details, 
see the HDMI Kit manual.

In Shooting or Playback mode, press [

m].

Select 

n “ HDMI Size.

Select an HDMI resolution. (p. 101)

Turn off your camera and HDTV.

Connect your camera to your HDTV using the optional 
HDMI cable.