Belkin f1d074 Guida Utente
Q: I am unable to select ports on the OmniView' using the keyboard combinations.
* For Cascaded OmniViews' make sure that all slide switch is set to "other". For single or top-level OmniView", slide switch must be on 'lst".
* For Cascaded OmniViews' make sure that all slide switch is set to "other". For single or top-level OmniView", slide switch must be on 'lst".
Q- I have some computers that are AT-style keyboards and some that are PS/2 style keyboard, can I connect them both to the OmniView" ?
* Yes. The A3X939 AT cable kit will have a keyboard adapter included.
* Yes. The A3X939 AT cable kit will have a keyboard adapter included.
Q: I am trying to cascade OmniViews" but the lower level OmniView" are not working and/or are not responding to the port selections or 'Hot
Keys'.
* Make sure that the slide switch on the top-level OmniView is at to '1st', and that the lower-level OmniView are on "other".
* When cascading to an FID066, use A31648-06 keyboard cable.
Keys'.
* Make sure that the slide switch on the top-level OmniView is at to '1st', and that the lower-level OmniView are on "other".
* When cascading to an FID066, use A31648-06 keyboard cable.
Q: I have the OmniView" in scan mode and it skips ports that do not have anything connected to it.
, Thatis connect the 0mniView will only scan ports that have computers connected to it. It knows that something is connected to it by the power
corning from the keyboard port.
, Thatis connect the 0mniView will only scan ports that have computers connected to it. It knows that something is connected to it by the power
corning from the keyboard port.
Mouse
Q: How do I control several computers if some use serial mice and others use P5/2?
* The OniniView' SE has Integrated Mouse Conversion Technology. This allows the user to control computers with either PS/2 or serial
mouse ports from a single PS/2 mouse.
* The OniniView' SE has Integrated Mouse Conversion Technology. This allows the user to control computers with either PS/2 or serial
mouse ports from a single PS/2 mouse.
Q: The mouse is not detected upon boot-up or the mouse is lost or acts erratically when switching ports.
• Check all cable connections.
• Do not move the mouse when switching and also give it a second or two after switching before moving the mouse.
• Check s4de switch settings.
• Check the mouse driver. Make sure you have the latest version.
• Make sure you are using the correct power supply, it should be 9VDC 600inA.
• For Cascaded OmniView’s make sure that all slide switch is set to "other'. For single or top-level OmniView, slide switch must be on '1st'. • If you
are using Windows95 or Windows3.1, remove any unnecessary mouse drivers from DOS configuration files (config.sys and autoexec.bat).
• If the problem continues, try a different mouse.
• Boot up the computer with the ports selected on the OmniView'
• Check all cable connections.
• Do not move the mouse when switching and also give it a second or two after switching before moving the mouse.
• Check s4de switch settings.
• Check the mouse driver. Make sure you have the latest version.
• Make sure you are using the correct power supply, it should be 9VDC 600inA.
• For Cascaded OmniView’s make sure that all slide switch is set to "other'. For single or top-level OmniView, slide switch must be on '1st'. • If you
are using Windows95 or Windows3.1, remove any unnecessary mouse drivers from DOS configuration files (config.sys and autoexec.bat).
• If the problem continues, try a different mouse.
• Boot up the computer with the ports selected on the OmniView'