Infocus lp425 Istruzione Sull'Installazione
Step 3
Raise the projector with the mounting bracket attached and slip through the hinge pin slot openings on the bracket
into the base box. Install the two (2) 6x12 hinge pin knurl knobs, spacers and washers loosely and the angle
adjusting knurl knobs. Adjust the angle and lock it. Then tighten the hinge knurl knobs.
( Do not over tighten! ).
Step 4
Check all the hardware for proper tightness and security.
NOTE: Projector can be removed quickly for portable use by; 1). Remove the knurl knob screw. 2). Hold the projector with
two hands and slide backwards to detach the sleeves from keyhole. Reverse the process for a quick reinstall.
WARNING!
The ceiling should be capable of supporting a weight of at least five times the projector or monitor weight. If
it cannot, the ceiling must be reinforced. Proper installation procedure by qualified personnel as outline. In
the installation instructions must be adhered to. Failure to do so could result in serious personal injury.
it cannot, the ceiling must be reinforced. Proper installation procedure by qualified personnel as outline. In
the installation instructions must be adhered to. Failure to do so could result in serious personal injury.
For further information or ordering assistance contact us at the address shown on the front of this page.