Omnitron iConverter Modular T1/E1 Multiplexer 2420-0-T Manuale Utente
Codici prodotto
2420-0-T
iConverter
iConverter
®
Modular system multiplexes up to sixteen independent
■
T1/E1 circuits and one 10/100/1000 copper Ethernet
onto a fiber link
Multiple groups of modules are supported in a chassis
Multiple groups of modules are supported in a chassis
■
Optional Ethernet connectivity to adjacent module
■
Remotely-managed configuration and testing enables
■
rapid deployment
Manageable via SNMP with Omnitron’s
Manageable via SNMP with Omnitron’s
■
NetOutlook
®
Management Software or third party software
CLI management interface via TELNET or serial port
CLI management interface via TELNET or serial port
■
Commercial (0 to 50º C ) and wide (-40 to 60º C)
■
operating temperature ranges
Lifetime Warranty and free 24/7 Technical Support
Lifetime Warranty and free 24/7 Technical Support
■
iConverter TM3 Fiber Transport Modules
Small Form Pluggable (SFP) or fixed fiber transceivers,
■
in standard and CWDM wavelengths
Multimode, single-mode dual fiber and single-mode
Multimode, single-mode dual fiber and single-mode
■
single-fiber options.
iConverter 4xT1/E1 MUX Modules
In band (FAC2) T1 loop-back
■
Out of band local loop-back on the copper and fiber
■
ports, remote fiber loop-back and circuit test modes
Supports balanced T1/E1 or unbalanced E1
Supports balanced T1/E1 or unbalanced E1
■
Configurable alarm relay contacts for audio/visual fault
■
notification
24 hour T1/E1 statistic logging
24 hour T1/E1 statistic logging
■
Optional external I/O clock port
■
iConverter
Modular T1/E1 Multiplexer
T1/E1 and Ethernet Managed Multiplexer System
The iConverter Modular T1/E1 Multiplexer transports up to
sixteen T1/E1 circuits and 10/100/1000 Ethernet over a fiber
transport link or CWDM channel. This flexible and scalable
system is comprised of an iConverter TM3 fiber transport
module, and one or more iConverter 4xT1/E1 MUX modules
installed in a 2, 5 or 19-module chassis.
Each iConverter TM3 module and up to four contiguous
Each iConverter TM3 module and up to four contiguous
iConverter 4xT1/E1 MUX modules combine to form a MUX
group. A MUX group can connect with another MUX group at
the opposite end of a dedicated fiber link. A MUX group can
also interoperate with a Managed iConverter fixed-configuration
T1/E1 Multiplexer.
Multiple MUX groups can be installed in a chassis, enabling
Multiple MUX groups can be installed in a chassis, enabling
high-density, star-topology deployments.
The iConverter Modular T1/E1 Multiplexer system is designed
The iConverter Modular T1/E1 Multiplexer system is designed
for service provider, enterprise, government and energy/utility
networks.
Service provider and utility applications include mobile
Service provider and utility applications include mobile
backhaul and business services that require delivery of
multiple T1/E1s and/or Ethernet. High density configurations
save rack space at the Central Office, and compact designs
provide cost-effective demarcation at the cell tower or customer
premises.
Enterprise and government applications include extension of
Enterprise and government applications include extension of
multiple T1/E1 circuits from a service provider demarcation
point, and building-to-building PBX connectivity.
The TM3 transport module has two Ethernet backplane ports
The TM3 transport module has two Ethernet backplane ports
for providing additional Ethernet connectivity to adjacent
modules . A common application of this feature is to combine a
4-Port switch module in the adjacent slot to provide an solution
with four additional 10/100/1000 ports.
The iConverter TM3 fiber transport module is available with
The iConverter TM3 fiber transport module is available with
fixed-fiber or Small Form Pluggable (SFP) transceivers. This
enables easy adaptability to different fiber types (multimode,
single-mode, single-mode single fiber), distances and
wavelengths (standard and CWDM).
The iConverter 4xT1/E1 MUX module supports four copper
The iConverter 4xT1/E1 MUX module supports four copper
RJ-48 ports for balanced T1/E1 applications. Adapter cables
are available to convert each RJ-48 interface to a BNC interface
for unbalanced E1 transport applications.
The 4xT1/E1 MUX module features an optional external clock
The 4xT1/E1 MUX module features an optional external clock
port that can be configured as a clock input or output. As an
input, the port can be connected to an external clock source,
such as a GPS receiver, to provide a common clock for the
module. As an output, the port can provide the recovered
T1/E1 clock from port 1 to other TDM equipment at the site.
Key Features