ICOM ic-207h Manuale Istruttivo

PANEL DESCRIPTION

i SET/LOCK SWITCH [SET(LOCK)]

➥ Selects SET mode when pushed. (p. 70)
➥ Toggles the lock function ON and OFF when pushed

and held. (p. 16)

o MONITOR/DTMF SWITCH [MONI(DTMF)]

➥ Toggles squelch opened and closed when pushed.

(pgs. 20, 24)

➥ Turns the DTMF memory encoder ON and OFF for auto

patch operation when pushed and held. (p. 46)

!0 OUTPUT POWER/DUPLEX SWITCH [LOW(DUP)]

➥ Each push changes the output power selection. (p. 22)

• There are 4 output powers available: low, mid-low, mid-high

and high.

➥ Push and hold to select a duplex setting. (p. 24)

• There are 3 duplex settings available: minus duplex (“– DUP”

appears, plus duplex (“+ DUP” appears) and simplex.

!1 TONE/TONE SCAN SWITCH [TONE(T-SCAN)]

➥ Each push selects a tone function. (p. 50)

• Tone encoder, pocket beep, tone squelch or tone function

OFF can be selected.

➥ Push and hold to start/stop the tone scan function.

(p. 52)

!2 MEMORY/CALL CHANNEL SWITCH [M/CALL(PRIO)]

➥ Selects and toggles memory mode or a call channel

(pgs. 29, 34)

➥ Activates the priority watch function when pushed and

held. (p. 44)

!3 VFO/MHz SWITCH [V/MHz(SCAN)]

➥ Selects and toggles VFO mode and 1 MHz tuning dis-

play. (p. 17)

➥ Starts a scan when pushed and held. (p. 39)

!4 FRONT PANEL RELEASE LATCH

While pushing this latch, slide the front panel to the left to
remove it.