Pioneer GM-D8400M Guida Utente

Installation

Attaching the Bass boost remote
control

Attach with tapping screws (3 mm

× 10 mm) at an

easily accessible location such as under the dash-
board.

Example of installation on the floor
mat or on the chassis

1. Place the amplifier where it is to be

installed. Insert the supplied tap-
ping screws (4 mm

× 18 mm) into

the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.

2. Drill 2.5 mm (1/8 in.) diameter holes

at the point marked, and install the
amplifier, either on the carpet or
directly to the chassis.

Tapping screw
(3 mm

× 10 mm)

Drill a 2.5 mm (1/8 in.)
diameter hole

Tapping screw
(4 mm

× 30 mm)

Floor mat
or chassis