TOA pe-304 Guida Specifiche

PE-304
Pendant Speaker System

The PE-304 are HIPS resin bass-reflex enclosure 5" (12cm) cone-
type pendant speakers intended for ceiling suspension installation. 
The PE-304 also includes a balanced dome tweeter. They have an 
outstandingly stylish design that is inspired by the finest lighting 
fixtures, allowing them to harmoniously blend in with lighting 
equipment.  They are ideally suited for such applications as BGM and 
announcements at high-ceiling venues such as airports, factories and 
shopping malls. The speakers are easy to repaint, extending the 
range of design needs they can meet. A directly attached sturdy 
suspension cable is extendable up to 

16.4 ft. (5 meters). 

PE-304 is driven on a high- 

and low-impedance(8) line.

Input impedance is adjustable with 

rotary switch on the upper

side of the speaker.

• Stylish and outstanding design inspired by the finest 

lighting fixtures

• Sturdy cable extendable up to 

16.4 ft. (5 meters)

• Repaintable
• Input impedance easily changeable 
• Ideally suited for BGM and announcements 

4–ø5 (ø0.2”)

36 (1.42”)

ø186 (ø7.32”)

ø100 (ø3.94”)

50 

(1.97”)

23 

(0.91”)

90

(3.54”)

Max.5000

(16.4 ft)

251 

(9.88”)

75 

(2.95”)

58 (2.28”)

ø16 (ø0.63”)

Enclosure: 

Bass-reflex type

Rated Input: 

6W (100V line), 3W (70V line) 

100V line: 1.7k

Ω (6W), 3.3kΩ (3W), 10 kΩ(1W)

70V line: 1.7k

Ω (3W), 3.3kΩ (1.5W), 10 kΩ (0.5W)

Sensitivity (1W, 1m):  90dB (500 – 5,000Hz, pink noise)

Frequency Response: 100 – 18,000Hz (peak –20dB)
Speaker Component: 5" (12cm) cone-type

2-core cabtyre cord 5m (16.4 ft)

Applicable Cable: 

600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to 
AWG 20 – 14)
7-core twisted copper wire: 0.75 – 1.25mm

2

 

(equivalent to AWG 18 – 16)

Connetion: 

Push-in connector (bridging terminal-2 branch type)

Finish: 

Enclosure: HIPS resin, off-white (RAL 9010 or 
equivalent colour)
Grille: Surface-treated steel plate net, off-white 
(RAL 9010 or equivalent colour), paint

Dimensions: 

ø186 

× 251(H) mm (ø7.32" × 9.88")  (unit only)

Weight: 

1.5kg (3.31 lb)  (unit only)

Accessory: 

Ceiling bracket 

× 1, Mounting hanger × 1, Ceiling 

cover 

× 1, Speaker mounting screw (4 × 16) × 4

Enclosure: 

Bass-reflex type

Rated Input: 

30W (100V , 70V line, 8

Ω) 

Rated Impedance: 

100V line: 330

Ω (30W), 500Ω (20W), 670Ω (15W) , 

1k

Ω (10W), 2kΩ (5W)

70V line: 170

Ω (30W), 250Ω (20W), 330Ω (15W), 

500

Ω (10W), 1 kΩ (5W)

8

Ω (30W)

Sensitivity (1W, 1m):  91dB (500 – 5,000Hz, pink noise)

Frequency Response: 70 – 20,000Hz (peak –20dB)

Speaker Component: 5" (12cm) cone-type + balanced dome tweeter

2-core cabtyre cord 5m (16.4 ft)

Applicable Cable: 

600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to 
AWG 20 – 14)
7-core twisted copper wire: 0.75 – 1.25mm

2

 

(equivalent to AWG 18 – 16)

Connetion: 

Push-in connector (bridging terminal-2 branch type)

Finish: 

Enclosure: HIPS resin, off-white (RAL 9010 or 
equivalent colour)
Grille: Surface-treated steel plate net, off-white 
(RAL 9010 or equivalent colour), paint

Dimensions: 

ø186 

× 251(H) mm (ø7.32" × 9.88")  (unit only)

Weight: 

2.1kg (4.63 lb)  (unit only)

Accessory: 

Ceiling bracket 

× 1, Mounting hanger × 1, Ceiling 

cover 

× 1, Speaker mounting screw (4 × 16) × 4

(Factory–preset wiring)

Note: Never connect the 8 

Ω terminal to the 100 V or 70 V line.

Rotary switch 1

HOT

Matching

transformer

Network

8

Ω

2k

Ω

16

Ω

8

Ω

OFF

OFF

OFF

70V

100V

1k

Ω

670

Ω

0

Ω

500

Ω

8

Ω

330

Ω

COM

0

Ω

COM

Rotary switch 2

(Factory–preset wiring)

Rotary switch

HOT

Matching

transformer

OFF

OFF

OFF

10k

Ω

3.3k

Ω

8

Ω

1.7k

Ω

COM

0

COM