Avaya a500 Guida Utente
Cajun A500 ATM Switch User Guide
9-1
9
PPP Commands
Overview
The
PPP
commands enable you to use Point-to-Point Protocol (PPP) in the Cajun A500.
This functionality enables you to call into the Cajun A500 and access Telnet, TFTP, and
the SNMP functionality. In addition, the Cajun A500 can dial out when triggered by a
Trap/Notify event. Some of the information required for a PPP connection is hard coded.
This information includes:
U Maximum Receive Unit - Sets the maximum message length (1500 bytes).
U Async Map - Requires Control s and Control q to escape.
U LCP and IPCP options - Negotiates all options.
U Dial Mode - Uses dial up mode for both virtual channels. Does not use telephone
number for dialin virtual channel but just use answer on first ring command and
then wait for CONNECT. Does not use demand dial for dialout channel. Instead the
Cajun A500 manages virtual channels through new
PPP
commands.
Subcommands
This command includes the following subcommands:
Command
Description
display
Displays PPP configuration options.
localPppHost
Set the local PPP host name for CHAP.
modem modemDialStrIN
Set modem dialup string for incoming calls.
modem modemDialStrOUT
Set modem dialup string for outgoing calls.
modem modemHangupStr
Set modem Hangup string.
modem modemSetupStr
Set modem setup string.
setCHAP
Set Host names, secrets for CHAP.
setdialin authentIn
Enables you to select PAP or CHAP for authentication.
setdialin peerIPIn
Enables you to enter the IP address of the peer the Cajun A500 can
receive calls from.
setdialout authentOut
Enables you to select PAP or CHAPSet for the dial authentication.