Avaya a500 Guida Utente
Configuring the Cajun A500 Network
Cajun A500 ATM Switch User Guide
3-5
Configuring Static Routes
To add and configure static routes:
1. In the ATM Switch A500 section of the Web Agent window, select Signaling.
1. In the Signaling section of the Web Agent window, select Static Routes. The
Local Static Routes window opens.
2. Click Add New Static Route. The Add a local Static Route window opens.
3. Enter the information for the Port, VPI, Address, and Mask for the static route.
4. Click Apply to save your changes, or Cancel to restore previous settings.
To configure this kind of static route using the CLI:
1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell
window opens.
2. Execute the
admin signaling route add
command from the Cajun A500
console. For more information on this command, see Chapter 6, "admin
Commands".
Deleting a Static Route
To delete static routes:
1. In the ATM Switch A500 section of the Web Agent window, select Signaling.
1. In the Signaling section of the Web Agent window, select Static Routes. The
Local Static Routes window opens.
2. Select the static route you want to delete and click Delete .
The
information
appears for the static route you deleted.
To delete a static route, using the CLI:
1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell
window opens.
2. Execute the
admin signaling route remove
command from the Cajun A500
console. For more information on this command, see Chapter 6, "admin
Commands".