Avaya callmaster ii Guida Di Riferimento

You may use the following keys to program the options:

●

The [ 

 ] key changes the option setting shown on the display and

keeps the voice terminal in programming mode.

●

The [ 

 ] key stores the option setting shown and exits

programming mode.

You may also use the following shortcut:

●

Dial "1" to exit programming mode and store the option as
Enabled (Mute Button, Record Out, Record Warning Tones), or 

(Display) or the Per Plug setting (Headset Volume).

●

Dial "2" to exit programming mode and store the option as either
Disabled (Mute Button, Record Out, Record Warning Tones, or
Headset Volume) or 2-Line (Display).

●

Dial "3" to set the Headset Volume to the Per Call setting. (This

option is ONLY available for the Headset Volume setting.)

1   While on-hook (the headset must be unplugged), press [ 

 ].

●

The light next to [ 

 ] goes on.

2    Press [ 

 ].

●

The CALLMASTER set is in option programming mode.

3    Dial the 2-digit code, "00."

●

The display shows the option settings (two options are
available on the CALLMASTER II; four options are available

on the CALLMASTER III and CALLMASTER IV).

●

The display will return to normal after approximately five
seconds.

NOTE: Use the same procedure for international settings. However,

you must dial "11" instead of "00." The top line of the display shows
the international settings, and the bottom line will either be blank or
report a problem with the (EEPROM) memory used to store the
options and settings.