Epson 600 Guida Utente
40
Maintaining Your All-in-One
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
ink remaining in the print head nozzles may dry out.
1. Turn on the WorkForce 600 Series.
If a cartridge is low or expended, you see a message
on the display screen. Note which cartridges need to
be replaced and press
on the display screen. Note which cartridges need to
be replaced and press
OK
. (You cannot print until
you have replaced any expended ink cartridges.)
If you’re replacing a cartridge before you see a
message on the display screen, press the
message on the display screen, press the
Home
button, press
l
or
r
to select
Setup
, and press
OK
.
Press
l
or
r
to select
Maintenance
and press
OK
.
Select
Ink Cartridge Replacement
and press
OK
.
2. Open the scanner, then open the cartridge cover.