Epson 600 Istruzione Sull'Installazione

Wireless Network Installation

To add the printer to your wireless network, you need to know the name (SSID) 
of your wireless network. If it has security enabled, you also need to know the 
WEP key or passphrase. Write down the SSID and WEP key or passphrase below:

■

Network name (SSID): _________________________________________

■

WEP key or passphrase: _________________________________________

Note: 
If the WEP key is either 5 or 13 characters, it’s ASCII. If the WEP key is either 10 or 26 
characters, it’s hexadecimal. The default WEP key is usually 1.

If your passphrase contains upper- or lowercase letters, be sure to note it correctly.

The printer supports the following wireless security modes: WEP 64, WEP 128, and 
WPA-PSK.

If you don’t know your wireless network name (SSID) or WEP key or passphrase, 
contact the person who set up your wireless network before you begin.

Note: 
This is a temporary connection used to configure the printer. You will be prompted to 
remove the cable when configuration is complete.

1. Connect an Ethernet network cable to the 

LAN 

(

10/100)

 port on your printer.