Epson CX11N Guida Utente

4. Press the u Up or d Down button 

several times until your desired group is 
selected, then press the r Right button.

The selected group appears in the 
second top row in the LCD panel.

Note:
To display the details of the registered group, 
press the Advanced/Menu button while 
a group is selected. To return to the group 
list again, press either the 
Advanced/Menu button or the l Left 
button.

5. Make the appropriate settings for your 

scanning purpose if necessary.

Note:
When you press the x B&W Start button 
without making any settings here, the fax 
transmission starts with the existing setting 
values.

6. Press the x B&W Start button to start the 

transmission.

When the product has an attached phone, 
you can select from four reception modes for 
receiving a call. The default is set to the Fax 
only mode.

To change the reception mode, follow the 
steps below. 

1. Press the 

Setup button on the 

control panel. 

The Setup light is lit and the Setup menu 
appears in the LCD panel.

Auto 
switching

The call is received by the 
attached phone and the 
product automatically answers 
after the phone rings for a 
certain duration specified by 
the Attached Phone Timeout 
setting.

Fax only

The product automatically 
answers and receives the fax.

Phone only

The call is received by the 
attached phone. Fax 
reception is not performed.

TAM

When an attached phone 
detects a fax/phone signal 
while answering an incoming 
call, the product automatically 
receives the fax.