Epson 2000 Manuale Utente

The loading position is the point where the paper stops when you
load paper using the 

button. This position is important

because it determines where the printing begins on the page. If the
printing is too high or too low on the page, change the loading

position using the micro-adjustment feature as described below.

CAUTION: Never use the platen knob to feed paper
after turning on the printer. (If you need to use the

adjust the loading position, always use the following

1.

Make sure that the printer is turned on and that paper (single
sheet or continuous) is ready for loading.

2.

Press the 

button to feed paper to the loading

position. Then press and hold down the 

button until

the beeper sounds once and the 

light begins to blink.

3.

Press 

button to feed the paper forward or the

button to feed the paper backward. When you 

set the desired loading position, you 

begin printing; the 

light automatically stops blinking.

use the 

and 

buttons to

adjust the loading position only while the 

light is

blinking.