Epson 2000 Manuale Utente
Roll Paper Holder
7.
Install the paper guide; then slide the edge guides together so
that they meet at about the center of the paper’s width. Press
the ON LINE button to set the printer on line.
the ON LINE button to set the printer on line.
Note:
To tear off paper after printing, set the printer off line,
press the
LINE FEED
button to advance the paper, then tear off
the paper against the tear-off edge of the printer cover.
Removing the roll paper holder
1.
Cut across the paper behind the point where it feeds into the
printer. Then use the
printer. Then use the
LOAD/EJECT
button to eject any paper
remaining in the printer.
2. Turn off the printer.
3. Remove the paper roll and shaft from the roll-paper holder.
4.
Lift up the printer and separate the roll-paper holder from the
printer.
Be sure to store the roll-paper holder in its original box and
packing materials.
packing materials.
4-16
Using the Printer Options