Epson EPL-N1200 Manuale Utente

To use the ECP mode, follow these steps:

1.

Make the ECP mode settings in the BIOS setting program that comes
with your computer. (For details of the settings and the program, see
your computer manual.) 

2.

Click the Start button, point to Settings, and then click Control Panel.

3.

Right-click the System icon, and click Open in the menu that appears.

4.

Select the Device Manager tab.

5.

Select the ECP Printer Port under Ports [COM & LPT], then click the
Properties button.

6.

Select the Resources tab.

7.

Make the appropriate setting in the Resource settings dialog box. (This
setting depends on your computer system. For details, see your
computer manual.)

8.

Click OK to save the settings.

The printer’s resident serial interface can be set for either RS-232C or
current loop operation. The data format settings can be changed using
SelecType; see Chapter 3. 

Word length:

7 or 8 bits

Parity:

None, odd, or even

Stop bits:

1 or 2

Printer ready protocol:

Enabled (XON/XOFF protocol set to ON)

Baud rate
(bits per second):

300, 600, 1200, 2400, 4800, 9600, 19200, 
38400, 57600

Signal level:

RS-232C; conforms to EIA

Connector:

D-sub 25-pin connector (computer)/mini
DIN (printer)