Epson 900 Guida Utente

5-2

Troubleshooting

◗

Make sure you’re using the correct PostScript driver for 

your printer (included on the EPSON Stylus RIP 

CD-ROM).

◗

If you’re working with scanned images, check the scanner 

software settings.

◗

Try cleaning the print head with the utilities provided with 

your printer, then print a few lines to check your output. 

See your printer user’s guide for instructions.

◗

Run the print head alignment utility using coated ink jet 

paper. See your printer user’s guide for instructions. You 

may want to use a loupe to check the alignment.

Solving Problems

Here are some detailed solutions to specific problems or error 

messages you may receive.

You see a Printer cannot be opened or Printer not found error 

message (Macintosh)

Possible cause

Solution

The printer is not 

turned on.

Turn on the printer and try printing again.

The printer is not 

correctly connected 

to the Stylus RIP 

standalone or server 

Macintosh.

Make sure the printer connection is secure at both 

ends of the cable. Also make sure the cable is not 

defective and it meets the specifications for your 

printer. See your printer user’s guide for more 

information.

You’re using an 

optional EtherTalk 

interface card and 

named the printer 

incorrectly.

Check the instructions in Chapter 1 to make sure 

you named the printer correctly. 

Nflight.bk  Page 2  Thursday, April 22, 1999  5:02 PM