Epson PRO 3800 Guida Informativa
15
15
If you are using the printer on a network, follow the instructions in this
chapter to:
chapter to:
•
Connect the printer to the network
•
Configure the network interface
•
Install the printer software
To connect the printer directly to your computer’s USB port, see the
Start Here sheet.
Start Here sheet.
Connecting to the Network
Make sure you have the correct cable for connecting the printer. To connect
to a network switch or hub, you need a standard RJ-45 “straight-through”
network cable. To connect directly to your computer’s network interface,
you need an RJ-45 crossover cable.
to a network switch or hub, you need a standard RJ-45 “straight-through”
network cable. To connect directly to your computer’s network interface,
you need an RJ-45 crossover cable.
1. Turn off the printer.
2. Connect one end of the appropriate cable to the printer’s Ethernet port.
Then connect the other end to your network switch or hub or your
computer’s Ethernet port.
computer’s Ethernet port.
3. Turn on the printer.
Once the printer is connected to your network, you need to configure it. See
“Configuring the Network Interface” on page 16 for instructions.
“Configuring the Network Interface” on page 16 for instructions.
Chapter 1:
Setting Up
the Printer On
a Network
Setting Up
the Printer On
a Network
sp3800Guide.book Page 15 Monday, January 29, 2007 11:08 AM