Epson PRO 3800 Guida Informativa
2-47
Handling Paper and Other Media
|
47
15. Press d or u to set the paper feed
amount for the bottom margin area
that is 0.79 or 1.18 inches (2 or 3 cm)
from the bottom of the paper (labelled
that is 0.79 or 1.18 inches (2 or 3 cm)
from the bottom of the paper (labelled
B
in the illustration to the right). Then
press Enter.
16. Press l and then d to select
DRYING TIME
, then press r.
17. Press d or u to select the number of seconds (from 1 to 10) that you
want the print head to wait between passes to allow the ink to dry. Then
press
press
Enter to save the setting.
18. When you are finished, press + Cancel to exit the Menu.
You can also make similar settings using the printer driver software. For
instructions, see page 55 (Macintosh) or page 73 (Windows).
instructions, see page 55 (Macintosh) or page 73 (Windows).
Selecting a Paper Configuration
Once you have created a paper configuration, follow these steps to select it
when you are ready to print on that type of paper:
when you are ready to print on that type of paper:
1. Press the
Menu
r
button, then press d until
CUSTOM PAPER
is
highlighted.
2. Press d to display
PAPER NUMBER
, then press r.
3. Press d or u to select the configuration number that you want to use. If
you select
STANDARD
, the printer uses the driver settings. If you select
a number from 1 to 10, the control panel settings override the driver
settings.
settings.
4. Press
Enter. The configuration number you selected is displayed on
the LCD.
5. Press + Cancel to exit the menu.
sp3800Guide.book Page 47 Monday, January 29, 2007 11:08 AM