Funai sv310fx1 Guida Utente

English

NFORMATION

Symptom

Remedy

Neither the picture nor the sound

signal outputs from the TV.

• Be sure the video signal output matches to your TV color

system (NTSC).

• Make sure the cables are correctly connected to your TV.

Unstable behavior occurs when the

device is connected to the USB hub.

• If you make a connection through the USB hub, it may cause an

unstable behavior of the device. Make sure to connect directly

to the PC when using the USB connector.

The picture crops out from the

top, bottom, left and right when the

device is connected to the TV to

play it back.

• Since the display of this device is FULL HD compatible and

designed to display the entire recorded range, the picture will be

cropped out on the 4 sides (top, bottom, left and right) when

viewed on a non-FULL HD-compatible device.

Black bars appear on the top and

bottom of the TV display when

the device is connected to the TV

through an A / V cables.

• This happens when a video recorded in HD is viewed on 4:3

TV. This is not a malfunction.

• If you use only a 4:3 TV, then record in the 4:3 modes (VGA,

QVGA and HiSpd).

Recorded picture with

High-defi nition (HD) cannot display

right on my HD TV.

• Set the aspect ratio of your HD TV to 16:9 (Wide).

No operation.

The device cannot be turned off.

The picture doesn't move and it

freezes forever.

• This device employs precision equipment which is susceptible

to static, environmental noise or interference. Sometimes those

factors cause the suspension of operation. If this happens, reset

the device to the factory default by pressing the Reset button

with a sharp pointed object such as ballpoint pen.

The device heats up when using this

device for many hours.

• This device may get hot when it is used over an extended

period of hours. This is not a malfunction. However, if the device

gets extremely hot or the temperature rises too rapidly, it may

be a malfunction of the device. Contact your dealer in such case.

Pixelation drops out in the device's

display.

• This device is manufactured on the basis of super-hi-technology

offering the effective pixels of over 99.99%. Occasionally a few

non active pixels may appear as a fi xed point of black, white,

red, blue or green. This is not a malfunction, and those pixels will

never be recorded on the fi le.

"MediaImpression2" cannot be

installed on my PC.

• Please visit at www.arcsoft.com/support to solve the problem.

Desktop icon for picture fi les

have changed after I installed

"MediaImpression2".

• The software chooses its own icon to be opened once you

install the MediaImpression2. To change to the original icon, click

with the right button and select "Properties ((R)"

R , then choose

"Change..." right on the "Opens with:" in the "General" tab.

Choose the program you want to use to open the fi le from the

"Recommended Programs:" or "Other Programs:" lists, then

click "OK".