Raymarine a65 Guida Utente

44

A65 GPS Chartplotter

Save Information to a CompactFlash Card

1. Insert a CF card into the card slot. See “Inserting and Removing the Compact-

2. Press the DATA key.
3. Select 

SAVE WPTS TO CARD.

 

A message box appears to show that the save is in progress. 
Note that the save can take as long as one minute to complete. This is because 
a 1MB file is always saved to the card, despite the number of waypoints you 
are saving.

4. When the save is complete, a new message box appears. View the contents of 

the CF card using the User Card Manager. You should see a 1MB file named 
‘ARCHIVE.FSH.’

To save the current image to a card, see “Save Image to User Card...“ on page 40.

Retrieve Information from a CompactFlash Card

1. Insert a CF card into the card slot. See “Inserting and Removing the Compact-

2. Press the DATA key and select 

LOAD WPTS FROM CARD. 

A message box appears to show when the load is complete. The new way-
points appear on your chart.

Sending and Receiving Information using NMEA

You can transfer and retrieve waypoints to and from another instrument or PC.

➤

To send or receive information using NMEA:

1. Press the DATA key.
2. Press TRANSFER ON NMEA. The NMEA soft keys are displayed.
3. Press the appropriate soft key, SEND or RECEIVE ON NMEA. The transfer starts 

and the SEND/RECEIVE soft keys are grayed out.
If you wish to stop the transfer at any point, press STOP TRANSFER.

4. When the transfer is complete, STOP TRANSFER grays out and the SEND/

RECEIVE soft keys reappear, if sending. When RECEIVE is active, you must 
press STOP TRANSFER to halt the transfer mode.

DATA