Gateway 2100 Guida Utente

User’s Guide

If you purchased the modem after the system, you will need to perfom a few

additional steps to enable the modem.

To enable the TelePath 28.8 modem:

1. Make sure the floppy disk drive module is installed in the modular option

bay, or connect the optional external floppy disk drive and install the
floppy drive module.

2. Once the modem has been installed, the

New Hardware Found

window

appears.

3. Click on the circle next to

Driver from disk provided by hardware manufac-

turer

so a black dot appears in the center of that circle. The

Install from

Disk

window appears.

4. Insert the driver disk into the floppy disk drive module (usually designated

drive A:).

5. Type:

a :

on the command line provided, then click Ok. The

Select Device

window

appears.

6. Select

Gateway 2000 TelePath 28.8 XJACK PCMCIA

, and click

Ok.

7. The modem is now enabled.

Once your modem is connected you can talk to the world, or send and
receive faxes on your system. Several on-line services are accessible via your

modem. Check your

Gateway Solo™ 2100 System CD for an OLS directory

that contains an overview of three different on-line services and registration

information.

See page 31.