Suunto spyder Guida Utente
37
4.3 DIVING
4.3.1 Basic Dive Data
The Spyder will remain in the Surface Mode at
The Spyder will remain in the Surface Mode at
depths less than 1.5 m [5 feet]. At depths greater
than 1.5 m the Spyder will go into the Diving
Mode.
All information on the display is labeled (Fig.
All information on the display is labeled (Fig.
4.14). During a no-decompression dive, the fol-
lowing information will be shown:
the available no-decompression time in min-
utes in the center window as NO DEC TIME
and as a bar graph on the right side of the
display. It is calculated based on the five fac-
tors listed in Section 8.1, Operating Prin-
ciples.
your present depth in meters [ft].
the Altitude Adjustment setting on the right
side of the center window with one to three
bars and a mountain symbol (A0, A1, or A2).
the Personal Adjustment setting on the left
side of the center window with one to three
bars and a diver symbol (P0, P1, or P2).
Fig. 4.14 Diving display. The
present depth is 19.3 m [63 ft]
and the no-decompression time
limit is 23 minutes in P1/A0
mode. The maximum depth
during dive was 29.8 m [98 ft]
and the elapsed dive time is 6
minutes. The alternative water
temperature 18ºC [64ºF] or the
current time 10:28 [10:28 am]
are shown for 5 s after pressing
the - or + buttons.