jWIN jd-vd703 Manuale Utente
En 23
Before requesting service for this portable DVD player, check the chart below for a possible cause of the problem
you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and
restore proper operation.
you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and
restore proper operation.
SYMPTOM (COMMON)
REMEDY
No power.
· Insert the power plug securely into the power outlet.
· Check if the ON/OFF button on the right of the player is set to on.
· Check the power at the AC outlet by plugging in another appliance as a test.
· Check if the ON/OFF button on the right of the player is set to on.
· Check the power at the AC outlet by plugging in another appliance as a test.
The player does not start playback
· Condensation has formed: wait about 1 to 2 hours to allow the player to dry out.
when PLAY is pressed.
· This player cannot play discs other than DVDs and audio CDs.
· Check if the disc is defective by trying another disc.
· Check the region (local) code.
· Check if the disc is defective by trying another disc.
· Check the region (local) code.
The player starts playback but stops
· The disc may be dirty and may require cleaning.
immediately.
· Ensure that the disc is installed with the label side up.
No picture.
· Ensure that the equipment is connected properly.
· Ensure that the input setting for the TV is “Video”.
· Check if outer equipment is on.
· Select the same channel and source on the TV as on the player.
· Ensure that the input setting for the TV is “Video”.
· Check if outer equipment is on.
· Select the same channel and source on the TV as on the player.
· Check if the LCD is on.
No sound.
· Ensure that the equipment is connected properly.
· If using a HiFi amplifier, try another sound source.
· Check the Audio Output Setting menu to make sure that 2CH Analog Output is selected.
· If using a HiFi amplifier, try another sound source.
· Check the Audio Output Setting menu to make sure that 2CH Analog Output is selected.
· Check the Volume Adjustment.
Distorted sound.
· Ensure that the input settings for the TV and stereo system are proper.
· No sound is heard during still picture (pause). This is normal.
· No sound is heard during still picture (pause). This is normal.
No audio at Digital Output.
· Check the digital connections.
· Check the settings menu to make sure that the audio output is set to DIGITAL.
· Check if the audio format of the selected audio language matches your receiver
· Check the settings menu to make sure that the audio output is set to DIGITAL.
· Check if the audio format of the selected audio language matches your receiver
capabilities.
Distorted picture.
Distorted picture.
· Check the disc for fingerprints and clean it with a soft cloth, wiping it from center
to edge.
· Sometimes a small amount of picture distortion may appear. This is not a malfunction.
to edge.
· Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Completely distorted picture or no color
· The disc format is not according to the TV-set used (PAL/NTSC).
in picture.
Picture is distorted during rapid
Picture is distorted during rapid
· The picture will be somewhat distorted at times: this is normal.
advance or rapid reverse.
No rapid advance (or rapid reverse)
No rapid advance (or rapid reverse)
· Some discs may have sections which prohibit rapid advance (or rapid reverse).
playback.
No 4:3 (16:9) picture.
No 4:3 (16:9) picture.
· Choose the correct setup “TV TYPE” item which matches the TV set used.
Picture is distorted during rapid
· The picture will be somewhat distorted at times: this is normal.
advance or rapid reverse.
No operations perform with the
No operations perform with the
· Pull out the insulative plastic plate before using.
remote control.
· Check the batteries are installed with the correct polarities (+ and –).
· The battery is depleted: replace it with new one.
· Point the remote control unit at the remote control signal sensor and operate.
· Operate the remote control unit at a distance of no more than 7 meters from the
remote control signal sensor.
· Remove the obstacles between the remote control unit and remote control signal sensor.
· The battery is depleted: replace it with new one.
· Point the remote control unit at the remote control signal sensor and operate.
· Operate the remote control unit at a distance of no more than 7 meters from the
remote control signal sensor.
· Remove the obstacles between the remote control unit and remote control signal sensor.
No key operation (by the DVD player
· Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect the
AC power and/or the remote control) is
cord and then re-connect it. (The player may not be operating properly due to
effective. lightning, static electricity or some other external factor.)
PLAY does not start playback even
PLAY does not start playback even
· This may be a result of the parental lock function that has been set.
when title is selected.
Confirm the “PARENTAL” setup.
Audio soundtrack and/or subtitle
· If the audio soundtrack and/or subtitle language does not exist on the disc, the
language is not the one selected
language selected at the initial settings will not be seen/heard.
at the initial settings.
No subtitles.
No subtitles.
· Subtitles appear only with discs that contain them.
· Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles.
· Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles.
Alternative audio soundtrack
· An alternative language can not be selected may result of no more than one language
(or subtitle) languages cannot be selected. available.
Angle cannot change.
Angle cannot change.
· This option requires disc support and may not be available due to informations of
disc.
disc.
4-1
Troubleshooting
Chapter 4