Eaton Pulsar MX 5000 RT 68504 Dépliant
Codici prodotto
68504
Entreprise Networks
Telecom
Process and infrastructures
Redundancy for highly critical applications.
www.mgeups.com
Can be built in to high density racks.
Single phase UPS
Pulsar MX
4/5/8/10/15/20 kVA
Continuous power supply
◗
Two front access hot-swappables
sub-modules (power and battery)
for maintenance without load
interruption.
sub-modules (power and battery)
for maintenance without load
interruption.
◗
Automatic battery test (test period
can be set).
can be set).
◗
Internal bypass built-in to supply the
load even if the UPS fails.
load even if the UPS fails.
◗
Large input voltage and frequency
ranges to avoid using the batteries
unnecessarily.
ranges to avoid using the batteries
unnecessarily.
Flexible
◗
Can be used as a free-standing tower
unit or 19" rack-mounted: only 3U
for Pulsar MX 4000 and 5000,
16U for Pulsar MX Frame
unit or 19" rack-mounted: only 3U
for Pulsar MX 4000 and 5000,
16U for Pulsar MX Frame
◗
LCD multilingual display with mimic
and LEDs for rapid view of the UPS
status, diagnostics and event log
and LEDs for rapid view of the UPS
status, diagnostics and event log
◗
Outputs: IEC 10A and 16A outlet
sockets and hardwired outputs
sockets and hardwired outputs
◗
Built-in Powershare system for remote
reboot of the equipment connected,
sequential start-up or load shedding
while operating from battery to
maintain the power to critical loads.
reboot of the equipment connected,
sequential start-up or load shedding
while operating from battery to
maintain the power to critical loads.
◗
Pulsar MX Frame is compatible with
three phase or single phase supplies.
three phase or single phase supplies.
◗
Backup time: 10 mins up to 2 hours
by adding 3U battery extension
modules.
by adding 3U battery extension
modules.
Minimum total cost
of ownership (TCO)
of ownership (TCO)
◗
More power with an output
power factor of 0.9.
power factor of 0.9.
◗
When the power supply needs
to be upgraded, the Pulsar MX
4000 and 5000 can be paralleled
to provide 8 kVA or 10 kVA
using the ModularEasy kit:
without extra cost on the
initial purchase.
to be upgraded, the Pulsar MX
4000 and 5000 can be paralleled
to provide 8 kVA or 10 kVA
using the ModularEasy kit:
without extra cost on the
initial purchase.
◗
Pulsar MX Frame is a modular
system with 5 kVA sub-modules
paralleled to provide up to 20 kVA
or 15 kVA with redundancy.
system with 5 kVA sub-modules
paralleled to provide up to 20 kVA
or 15 kVA with redundancy.
High performance UPS upgradeable
from 4 kVA to 20 kVA
from 4 kVA to 20 kVA
Can be used for 20 to 110
servers, ideal for:
servers, ideal for:
◗
departmental networks, servers
and workstations
and workstations
Pulsar MX: 10 minutes
backup, tower/rack
mounting (3U), mimic,
LCD display.
Pulsar MX has 2 sub-modules
(power electronics and battery)
which are hot swappable.
(power electronics and battery)
which are hot swappable.
Pulsar MX Frame 15
and 20 kVA tower
and rack-mounting (16U),
modular system with
5 kVA sub-modules.
Paralleling 2 Pulsar MXs
using ModularEasy for 2N
or N+1 redundancy.
The power level can be upgraded simply and without
interruption for the existing loads as the number
of loads supplied is increased.
PULMX515UK.qxd 16/02/06 15:13 Page 1