LG LDG5315ST Guida Utente

INSTALLATION

Do not operate the burners without all parts in 

place.

Place the burner caps and heads on the cooktop. 

Make sure that the caps and heads are placed in the 

correct locations. There is one small, one medium, 

one large, one oval(center), and one extra large 

burner head and cap.

Center Burner

(On some models) 

Oval (Center) burner 

head/cap assembly

Small burner 

head and 

cap

Medium 

burner 

head 

and cap

Large burner 

head and cap

Front of range

Extra large burner 

head and cap

Hole

Electrode

Make sure the hole in the burner head is positioned 

over the electrode.

Select a surface burner knob and simultaneously 

push in and turn to the 

Lite position. You will hear 

a clicking sound indicating proper operation of the 

spark module.
Once the air has been purged from the supply lines 

the burner should ignite within 4 seconds. After the 

burner ignites, rotate the knob out of the 

Lite position. 

Try each burner in succession until all burners have 

been checked.

The combustion quality of the burner flames needs to 

be confirmed visually.

A  

Yellow flames - Call for service.

B  

Yellow tips on outer cones - This 

is normal for LP gas.
C  

Soft blue flames - This is normal 

for natural gas.

 

•

With LP gas, some yellow tipping on outer 

cones is normal.

Light all surface burners.

Turn the knob on the burner being adjusted to 

Lo.

Remove the knob.

Insert a small, flat-blade screwdriver into the 

valve shaft.

Hold the valve shaft with one hand while turning 

the screw to adjust with the other.

Replace the knob.

Test the flame stability.
Test 1: Turn the knob from 

Hi to Lo quickly. If the 

flame goes out, increase the flame size and test 

again.
Test 2: With the burner on a 

Lo setting, open 

and close the oven door quickly. If the flame is 

extinguished by the air currents created by the 

door movement, increase the flame height and 

test again.

Repeat steps 1-6 for each surface burner.