LG 14CC3AB Manuale Proprietario
Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
• In this manual, the OSD (On Screen Display)
may be different from your TV’s because it is just
an example to help you with the TV operation.
an example to help you with the TV operation.
Turning on/off the TV
Press the POWER (or ON/OFF) button on the set.
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH
D
/
E
button on the set or
POWER, TV/VIDEO, CH
D
/
E
or number button
on the remote control.
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on
the set.
Selecting the on screen language
1. Press the MENU button and then
D
/
E
button
until the menu is displayed.
2. Press the
G
and then
D
/
E
button to select
Language
.
3. Press the
G
and then use
D
/
E
button to
select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Repeatedly press the MENU button to exit.
Memorizing Channels
This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
number buttons (0 ~ 9) to change as .
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
number buttons (0 ~ 9) to change as .
Memorizing the Channels by
AUTO PROGRAM
AUTO PROGRAM
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
select the desired channel with the
the active channels in your area then you can
select the desired channel with the
D
/
E
buttons.
Using the A.PROG button
You can conveniently perform AUTO PROGRAM
using the AUTOPRG. button on the remote
control.
1. Press the AUTOPRG. button.
2. Press the
using the AUTOPRG. button on the remote
control.
1. Press the AUTOPRG. button.
2. Press the
G
or AUTOPRG. button.
The AUTO PROGRAM starts now.
If you want to stop auto programming, press the
ENTER (
ENTER (
A
) button.
Only the channels searched up to that time are
memorized.
Notes : • If the programmed signal has poor
quality, memorize again in the
Auto
prog.
.
• AUTO PROGRAM stores all receivable
channels regardless of receiving signal
(RF, Cable).
(RF, Cable).
• If channels of general wireless TV and
cable TV are duplicated, press the
number buttons (0 ~ 9) to change as .
number buttons (0 ~ 9) to change as .
Using the MENU button
1. Press the MENU button and then
D
/
E
button
the until the menu is displayed as shown right.
2. Press the
G
and then
D
/
E
button to select
Auto prog.
.
3. Press the
G
button to enter the
Auto prog.
mode.
4. The AUTO PROGRAM starts now.
Basic TV operation
6
CH.
CH.
Move
+
+
Next
+
{
+
Exit
}
Language
{
Input
{
Key
+
lock
{
Caption
+
{
Auto
+
demo
{
Channels of general wireless TV
Channels of Cable TV