LG 32LD655H Manuale Utente

13

206-4137

 

Typical TV Installer Menu

Note: The Installer Menu header will vary 

depending on the TV you are setting up. 

Adjust the settings for these 

Installer Menu items.

a) Use the Installer Remote to enter the TV Installer Menu: Press 

MENU repeatedly until the on-screen menu locks up, and then 

press 

9-8-7-6 + ENTER. Refer to pages 15 to 20 for detailed 

information on Installer Menu items.

b) Set Installer Menu item 

117 FACT DEFAULT to 001 and press 

ENTER on the Installer Remote. 
This clears all Installer Menu custom settings, channel labels/

icons, etc. and reloads the factory default settings. The value 

will change back to 0 after the internal TV controller (Protocol 

Translator Card [PTC]) has been restored to factory default 

condition. This step ensures that the TV Channel Memory will 

be the active Channel List.

c) Set Installer Menu item 

003 BAND/AFC, as appropriate.

•  Broadcast: Set to 000.
•  CATV: Set to 001 (default).
•  HRC: Set to 002.
•  IRC: Set to 003. 

d) Set any other Installer Menu items that affect your TV program-

ming network to the required configuration. For example, en-

able/disable Aux sources, set a Start Channel, etc.

e) After you have adjusted all required Installer Menu item set-

tings, press 

ENTER on the Installer Remote to exit the menu 

and save your changes.

On-screen setup menus control the features of the TV (see page 

22). Press 

MENU on the Installer Remote to access the setup 

menus, and then set Channel, Picture, Audio, Lock, Time, etc. 

options to the desired configurations. See also the Clonable Menu 

Features list on page 28.
Note: If desired, you can run Auto Tuning (see step 3) prior to 

completing this step. 

This section describes how to set up a Master TV when the EBL is in Pass-through Mode. 
Note: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel Search) is disabled if 

there is an Aux input active.
Note: Refer to “FTG Mode of Operation” on pages 24 to 27 for information on configuring/editing

Channel Map and Installer Menu settings for an individual TV in FTG Mode.

(Continued on next page)

Set the TV features to the desired 

configuration for the end user. 

CHANNEL

PICTURE

AUDIO

TIME

INPUT

USB

OPTION

LOCK