Viewsonic CDE4803 Manuale Utente
13
5. Change your settings
Using the remote control:
1. Press [ ]
MENU
button to display the OSD
menu.
2. Press [ ] [ ] [ ] or [ ] button to select its menu
item or to adjust its value. Press [
OK
] button to
confirm.
3. Press [ ]
EXIT
button to go back to the
previous menu layer.
4. Press [ ]
MENU
button to exit the OSD menu.
Using the display’s control buttons
1. Press [
MENU
] button to display the OSD
menu.
2. Press [▲] [▼] [+] or [-] button to choose menu
item or adjust its value.
3. Press [
INPUT
] button to confirm menu
selection and enter its submenu.
4. Press [
MENU
] button to exit the OSD menu.
5.1. Settings
5.1.1. Picture
Picture Mode
Select a predefined picture setting.
Brightness
Adjust screen brightness.
Contrast
Adjust video contrast.
Color
Adjust the Color saturation of the picture.
Flicker Free
Panel setting to enable/disable flicker free function.
Advanced settings
Access advanced settings such as tint settings
Select a predefined picture setting.
Brightness
Adjust screen brightness.
Contrast
Adjust video contrast.
Color
Adjust the Color saturation of the picture.
Flicker Free
Panel setting to enable/disable flicker free function.
Advanced settings
Access advanced settings such as tint settings
and video contrast settings.
• {
Color temp.
}: Change the colour balance.
• {
Blue light filter
}: To reduce the blue light of
panel
• {
Noise reduction
}: Select the amount of
noise reduction for the picture.
• {
Tint
} Adjust to increase or decrease the
flesh tone color.
• {
Sharpness
}: Adjust the sharpness of the
picture.
• {
Dynamic contrast
}: Dynamically enhance
the details in the dark, medium and light
areas of the picture.
• {
Aspect ratio
}: The pictures you receive
may be transmitted in 16:9 format (wide
screen) or 4:3 format(conventional screen).
• {
Overscan
}: Change the display area of the
image.
• {
Backlight
}: Adjust the brightness of this
display’s backlight.
Reset picture settings
Reset all your customized settings to the factory
Reset all your customized settings to the factory
defaults.