Omnitron miConverter Gx 1203-2-6 Manuale Utente
Codici prodotto
1203-2-6
miConverter
miConverter
TM
Miniature Gigabit Ethernet media converter
Supports 1000BASE-T, 1000BASE-X and the
IEEE 802.3 specification
Plug-and-Play capability
USB power via optional Power Adapter Cable
Supports Full/Half-Duplex fiber optic auto-negotiation
Multimode and single-mode fiber options
LED indicators for UTP and fiber status
Domestic, Universal and
Country/Region specific
power
supply options
Wall-mount with optional mounting brackets or an
18-Module Powered Chassis
Small and lightweight (5 ounces)
Cost-effective
Lifetime Warranty and free 24/7 Technical Support
miConverter
GX
1000BASE-T to 1000BASE-X Gigabit Ethernet Media Converter
The miConverter Gx is a miniature 1000BASE-T UTP copper
to 1000BASE-X fiber Gigabit Ethernet media converter. The
miConverter Gx provides cost-effective fiber connectivity from
Gigabit switches to diagnostic equipment, desktop and laptop
computers.
The miConverter Gx is the first Gigabit media converter
The miConverter Gx is the first Gigabit media converter
powered by a USB port (1.0, 1.1, and 2.0). An optional USB
Power Adaptor Cable is available, which reduces the module’s
weight and eliminates the need to tether the miConverter Gx
to an electrical outlet.
The Plug-and-Play capability of the miConverter Gx simplifies
The Plug-and-Play capability of the miConverter Gx simplifies
fiber-to-the-laptop and fiber-to-the-desktop deployments.
The miConverter Gx features auto-negotiation, which allows
connected network devices to auto-negotiate their Duplex and
Pause modes. The miConverter
Gx also provides manual
configuration with built-in DIP-switches for compatibility with
legacy Gigabit fiber products. These features ensure the
miConverter Gx is compatible with the widest range of Gigabit
fiber equipment.
The miConverter Gx
The miConverter Gx
is available in multimode dual fiber,
single-mode dual fiber and single-mode single-fiber options.
It supports SC and ST connectors with fiber link distances up
to 550m over MM fiber, 80km over SM fiber and 40km over
single-fiber.
The miConverter Gx supports industry standard wavelengths
The miConverter Gx supports industry standard wavelengths
depending on the fiber type. For multimode dual fiber, the
miConverter Gx uses 850nm (Sx). When using single-mode
dual fiber models with distances of up to 34km, the miConverter
Gx uses 1310nm (Lx). For distances of up to 80km, the
miConverter Gx uses 1550nm (Zx).
Single-mode single-fiber miConverter Gx
Single-mode single-fiber miConverter Gx
models use
1310nmTx/1550nmRx and 1550nmTx/1310nmRx wave
division multiplexing. The SF converters must be used in pairs
where the transmit (Tx) wavelength of one converter matches
the receive (Rx) wavelength of the other.
The LED indicators provide diagnostic data such as availability
The LED indicators provide diagnostic data such as availability
of power, port activity, link status, and Duplex modes to assist
in network installation and maintenance.
The miConverter Gx combines Gigabit Ethernet connectivity
The miConverter Gx combines Gigabit Ethernet connectivity
with the lightweight design and low-power consumption
required for both permanent deployment and mobile service
networks.
Key Features
Shown with optional wall mount bracket