Sony CDXGT920U Manuale
13
Tuning automatically
1
Select the band, then push the multi
way encoder left/right to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
way encoder left/right to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, push and hold the multi way encoder left/right
to quickly locate the approximate frequency, then push
the multi way encoder left/right repeatedly to fine
adjust to the desired frequency (manual tuning).
If you know the frequency of the station you want to
listen to, push and hold the multi way encoder left/right
to quickly locate the approximate frequency, then push
the multi way encoder left/right repeatedly to fine
adjust to the desired frequency (manual tuning).
Receiving a station through a list
— LIST
— LIST
You can list up the frequency.
1
Select the band, then push (LIST) up.
The preset list appears.
The preset list appears.
2
Rotate the multi way encoder until the
desired station appears.
desired station appears.
3
Press the multi way encoder to receive
the station.
The display returns to normal reception
mode.
the station.
The display returns to normal reception
mode.
USB devices
USB device playback
1
Remove the USB cap from the USB
connector and connect the USB
device to the USB connector.
connector and connect the USB
device to the USB connector.
Playback starts.
If a USB device is already connected, to start
playback, press (SOURCE) repeatedly until
“USB” appears.
playback, press (SOURCE) repeatedly until
“USB” appears.
Press (OFF) to stop playback.
Notes
• Before removing a USB device, be sure to stop
• Before removing a USB device, be sure to stop
playback first. If you remove your USB device during
playback, data in the USB device may be damaged.
playback, data in the USB device may be damaged.
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
connection.
Display items
Example: when you set Info (information) mode
to “All” (page 16).
to “All” (page 16).
A
ATRAC/WMA/MP3/AAC indication*
1
WMA/MP3/AAC indication*
2
B
Clock
C
Folder number/Track number/Elapsed
playing time, Track name, Artist name,
Album name
playing time, Track name, Artist name,
Album name
*1 When an ATRAC Audio Device is connected.
*2 When a Mass Storage Class Device is connected.
*2 When a Mass Storage Class Device is connected.
continue to next page
t
A
B
C