Sony XM-404EQX Guida Specifiche
12
2000 MOBILE PRODUCT GUIDE – PART 2
OTL (output transformerless) Circuit
Pulse Power Supply
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
High Level Input Connector
Speaker Terminals
2-8 ohms (stereo)
4-8 ohms (when used as bridging amplifier)
4-8 ohms (when used as bridging amplifier)
40 W x 4 (20-20 kHz, 0.04% THD, at 4 Ω)
50 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω)
100 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω)
50 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω)
100 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω)
80 W x 4 (at 4 Ω)
80 W x 2 + 200 W x 1 (at 4 Ω)
200 W x 2 (at 4 Ω)
50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ± 12 dB
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 Ω)
0.2-4.0 V (RCA pin jack);
0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 23 A
Remote Input: 1.5 mA
Approx. 282 x 55 x 320 mm (11
80 W x 2 + 200 W x 1 (at 4 Ω)
200 W x 2 (at 4 Ω)
50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ± 12 dB
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 Ω)
0.2-4.0 V (RCA pin jack);
0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 23 A
Remote Input: 1.5 mA
Approx. 282 x 55 x 320 mm (11
1
/
8
x 2
1
/
4
x 12
5
/
8
in.) (not incl. projecting parts and controls)
Approx. 3.2 kg (7 lb. 1 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
Mounting Screws (4); Terminal Cap (1)
Specifications
Circuit System
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs (at 14.4 VDC)
Maximum Output
Equalizer
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Power Requirements
Power Supply Voltage
Current Drain
Low-Pass Filter
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
Weight
Supplied Accessories
XM-404EQX
4/3/2 Channel Amplifier/EQ
• Recessed Controls w/Level LEDs
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• 50/200/800/3.2k/12.8 kHz Frequency Centers
• F&R 5 Band +/- 12 dB Adjustable EQ
• Heavy-Duty Connectors
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• 50/200/800/3.2k/12.8 kHz Frequency Centers
• F&R 5 Band +/- 12 dB Adjustable EQ
• Heavy-Duty Connectors
• 40 W x 4 Ch at 0.04% THD
• 40 W x 2 + 100 W x1 at 0.1% THD
• 100 W x 2 at 0.1% THD
• RCA and Speaker Level Inputs
• Regulated MOSFET Power Supply
• 40 W x 2 + 100 W x1 at 0.1% THD
• 100 W x 2 at 0.1% THD
• RCA and Speaker Level Inputs
• Regulated MOSFET Power Supply
Design and specifications subject to change without notice.