Sony ss-cnp700 Manuale
13
US
F:\Sony SEM
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\030CON_HT-
DDW700_UCA.fm
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\030CON_HT-
DDW700_UCA.fm
masterpage: Right
HT-DDW700
2-661-459-12 (2)
Getting Star
ted
You can install your front and surround
speakers on the wall.
speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker as
shown in the illustrations
below.
that are suitable for the hole on
the back of each speaker as
shown in the illustrations
below.
2
Fasten the screws to the wall.
The screws should protrude to
7/32 to 9/32 inch.
The screws should protrude to
7/32 to 9/32 inch.
3
Hang the speakers on the
screws.
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
strength or improper screw installation, natural
calamity, etc.
Installing the speakers on the
wall
wall
more than 5/32 inch
more than 1 inch
Hole on the back of the speaker
3/16 inch
13/32 inch
7/32 to 9/32 inch
3/16 inch
13/32 inch
Hole on the back of the speaker
010COV_HT-DDW700_UCA.book Page 13 Friday, January 13, 2006 3:36 PM