D-Link DAS-3626 Manuale Utente
DAS-3626 VDSL2 Switch User Manual
RADIUS Accounting Settings
The Accounting feature of the switch uses a remote RADIUS server to collect information regarding events occurring
on the switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the
switch to send these informational packets.
on the switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the
switch to send these informational packets.
•
Account Session ID
•
Account Status Type
•
Account Terminate Cause
•
Account Authentication
•
Account Delay Time
•
Account Session Time
•
Username
•
Service Type
•
NAS IP Address
•
NAS Identifier
•
Calling Station ID
There are three types of Accounting that can be enabled on the switch.
Network – When enabled, the switch will send informational packets to a remote RADIUS server when network
events occur on the switch.
events occur on the switch.
Shell – When enabled, the switch will send informational packets to a remote RADIUS server when a user either logs
in, logs out or times out on the switch, using the console, Telnet, or SSH.
in, logs out or times out on the switch, using the console, Telnet, or SSH.
System - When enabled, the switch will send informational packets to a remote RADIUS server when system events
occur on the switch, such as a system reset or system boot.
occur on the switch, such as a system reset or system boot.
Remember, this feature will not work properly unless a RADIUS Server has first been configured. This RADIUS server
will format, store and manage the information collected here.
will format, store and manage the information collected here.
To view this window, click Security > Access Authentication Control > RADIUS Accounting Settings as shown
below:
below:
Figure 143. RADIUS Accounting Settings menu
121