D-Link DAS-3626 Manuale Utente
DAS-3626 VDSL2 Switch User Manual
The following parameters can be configured.
Parameter Description
Type
Select the type of ACL you wish to create, either normal or CPU.
Profile Name
Select a unique Profile Name for this profile set.
Profile ID (1-12)
Enter a unique identifier number for this profile set. This value can be set from 1 to 12.
Access ID (1-128)
Type in a unique identifier number for this access. This value can be set from 1 to 128.
From
Use the drop-down menu to select from MAC Address, IPv4 Address or IPv6.
To
Use the drop-down menu to select from MAC Address, IPv4 Address or IPv6. When IPv6 is
selected the user can only enter the IPv6 source address or the IPv6 destination address at
any one time.
selected the user can only enter the IPv6 source address or the IPv6 destination address at
any one time.
Action
Select Permit to specify that the packets that match the access profile are forwarded by the
switch, according to any additional rule added (see below).
Select Deny to specify the packets that match the access profile to be filtered.
switch, according to any additional rule added (see below).
Select Deny to specify the packets that match the access profile to be filtered.
Select Mirror to specify that packets that match the access profile are mirrored to a port
defined in the config mirror port command. Port Mirroring must be enabled and a target port
must be set.
defined in the config mirror port command. Port Mirroring must be enabled and a target port
must be set.
Option
Use the pull down menu to select an option, the user can choose between Rate Limiting,
Change 1P Priority, Replace DSCP and Replace ToS Precedence.
Change 1P Priority, Replace DSCP and Replace ToS Precedence.
Apply To
Use the pull down menu to select an option, the user can choose between Ports, VLAN
Name or VLAN ID and enter the appropriate information.
Name or VLAN ID and enter the appropriate information.
Click Apply to implement changes made.
Access Profile List
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the
switch will examine, such as the MAC source address or the IP destination address. The second part is entering the
criteria the switch will use to determine what to do with the frame. The entire process is described below in two parts.
switch will examine, such as the MAC source address or the IP destination address. The second part is entering the
criteria the switch will use to determine what to do with the frame. The entire process is described below in two parts.
To view this window, click ACL > Access Profile List as shown below:
Figure 98. Access Profile Lists
85