D-Link DSL-584T Manuale Utente

DSL-584T ADSL Router User Guide 

To enable UPnP for any available connection, click to check the Enable UPnP selection box, select the connection or 
connections on which you will enable UPnP listed under Available Connections and click the Apply button. 

Use the Virtual Server window to set up single-port, trigger port or static-port range forwarding rules applied to 
inbound (WAN-to-LAN) traffic. The Virtual Server function allows remote users to access services on your LAN such 
as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-584T will accept remote requests for these services at 
your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to 
the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be 
within the useable range of the subnet occupied by the Router. 

UDP/TCP port redirection is used to direct inbound traffic to the specified servers or workstations on your private 
network. Port redirection can also be used to direct potentially hazardous packets to a proxy server outside your firewall. 
For example, you can configure the Router to direct HTTP packets to a designated HTTP server in the DMZ. You can 
define a set of instructions for a specific incoming port or for a range of incoming ports. Each set of instructions or rule 
is indexed and can be modified or deleted later as needed. 

The Virtual Server options include a list of preconfigured rules (listed below) for commonly used protocols in the 
Virtual Server List. To enable a preconfigured rule, click the selection box for the rule you want to enable and click the 
Apply button. 

 

 

 

 

9