D-Link DSL-584T Manuale Utente

DSL-584T ADSL Router User Guide 

Use this edit client community for server SNMP access.  

• 

Name: Edit community Name.  

• 

Access Right: Access Right may choose ReadOnly or ReadWrite. 

The management agent can send an event notification to the management 
system to identify the occurrence of conditions such as threshold that 

exceeds a predetermined value. 

• 

Destination IP: Insert destination IP address to launch trap 

message. 

• 

Trap Community: Insert Trap Community name. 

• 

Trap Version: Drop-down menu allows you to select SNMP v1 or 

SNMP v2c. 

Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be used in a 
single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) 
routed data. The rules are based on IP address and TCP/UDP port.  

Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed 
in the Outbound Filter List at the bottom of the window. The table below describes the various parameters that are 
configured for the filter rules. 

 

 

14