D-Link DSL-584T Manuale Utente

DSL-584T ADSL Router User Guide 

 

Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This 
is used to specify that all packets destined for a particular network or subnet use a predetermined gateway. 

 

To add a static route to a specific destination IP on the local network, enter a Destination IP address, Netmask, then 
click the Gateway radio button and type in the Gateway’s IP address. Click Apply to enter the new static route in the 
table below. The route becomes active immediately upon creation.  

To add a static route to a specific destination IP on the WAN, click the Connection radio button and choose a 
connection from the pull-down menu, then enter a Destination IP address and Netmask. Click Apply to enter the new 
static route in the table below. The route becomes active immediately upon creation 

To remove a static route from the table in the bottom half of the window, choose to Delete it from the table and click the 
Apply button. Remember to save the configuration changes. 

 

17