D-Link DSL-584T Manuale Utente

DSL-584T ADSL Router User Guide 

This is the Username used to log on to your ADSL service 
provider’s network. It is commonly in the form 

− 

user@isp.co.uk Your ADSL service provider uses this to 

identify your account. 

Record info here 

This is the Password used, in conjunction with the Username 

above, to log on to your ADSL service provider’s network. 

This is used to verify the identity of your account. 

 

These settings describe the method your ADSL service 

provider uses to transport data between the Internet and 

your computer. Most users will use the default settings. You 

may need to specify one of the following WAN Setting and 

Connection Type configurations (Connection Type settings 

listed in parenthesis):  

PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA VC-Mux) 

Bridge Mode (1483 Bridged IP LLC or 

1483 Bridged IP VC-Mux) 

Static IP Address (Bridged IP LLC, 1483 Bridged IP VC-Mux, 

1483 Routed IP LLC, 1483 Routed IP VC-Mux or IPoA) 

Dynamic IP Address (1483 Bridged IP LLC or 1483 Bridged IP 
VC-Mux)   

Default = PPPoE/PPPoA (PPPoE LLC)  

 

Most users will not be required to change this setting. The 
Virtual Path Identifier (VPI) is used in conjunction with the 

Virtual Channel Identifier (VCI) to identify the data path 

between your ADSL service provider’s network and your 

computer. If you are setting up the Router for multiple virtual 

connections, you will need to configure the VPI and VCI as 

instructed by your ADSL service provider for the additional 
connections. This setting can be changed in the WAN 

Settings window of the web management interface. Default 

value = 8 

 

Most users will not be required to change this setting. The 

Virtual Channel Identifier (VCI) used in conjunction with the 

VPI to identify the data path between your ADSL service 

provider’s network and your computer. If you are setting up 

the Router for multiple virtual connections, you will need to 

configure the VPI and VCI as instructed by your ADSL service 
provider for the additional connections. This setting can be 

changed in the WAN Settings window of the web 

management interface. Default value = 35 

 

 

Note 

 

vi